Zinc

You are here: Home / Zinc
Saves OLD ZINC DIE CAST SCRAP
  • Saves
  • Type : OLD ZINC DIE CAST SCRAP
  • Metals : Zinc

Description

Shall consist of miscellaneous old zinc base die cast￾ings, with or without iron and other foreign attach￾ments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimming. All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible. Material containing in excess of 30% iron will not constitute good delivery.

References

Scabs NEW ZINC DIE CAST SCRAP
  • Scabs
  • Type : NEW ZINC DIE CAST SCRAP
  • Metals : Zinc

Description

Shall consist of new or unused, clean, zinc base die castings. Castings to be unplated, unpainted, and free from corrosion.

References

Scoot ZINC DIE CAST AUTOMOTIVE GRILLES
  • Scoot
  • Type : ZINC DIE CAST AUTOMOTIVE GRILLES
  • Metals : Zinc

Description

Shall consist of clean, old or used zinc base die cast automotive grilles, free from soldered material. All foreign attachments and extraneous materials are deductible.

References

Scope NEW PLATED ZINC DIE CAST SCRAP
  • Scope
  • Type : NEW PLATED ZINC DIE CAST SCRAP
  • Metals : Zinc

Description

Shall consist of new or unused clean, plated zinc base die castings, free from corrosion.

References

Score OLD SCRAP ZINC
  • Score
  • Type : OLD SCRAP ZINC
  • Metals : Zinc

Description

Shall consist of clean dry scrap zinc, such as sheets, jar lids, clean unalloyed castings and anti-corrosion plates. Borings and turnings are not acceptable. Material must not be excessively corroded or oxi￾dized. All foreign attachments and extraneous mate￾rials are deductible.

References

Screen NEW ZINC CLIPPINGS
  • Screen
  • Type : NEW ZINC CLIPPINGS
  • Metals : Zinc

Description

Shall consist of any new pure zinc sheets or stamp￾ings free from corrosion. To contain no foreign mate￾rial or attachments. Printers zinc, such as engravers zinc, lithograph sheets and addressograph plates subject to special arrangements. Printers zinc to be free of routings.

References

Scribe CRUSHED CLEAN SORTED FRAGMENTIZERS DIE CAST SCRAP, AS PRODUCED FROM AUTOMOBILE FRAGMENTIZERS
  • Scribe
  • Type : CRUSHED CLEAN SORTED FRAGMENTIZERS DIE CAST SCRAP, AS PRODUCED FROM AUTOMOBILE FRAGMENTIZERS
  • Metals : Zinc

Description

To be clean, free of dirt, oil, glass, rubber, and trash. To contain a maximum of 5% unmeltables such as free iron, copper, aluminum and other metals.

References

Scroll UNSORTED ZINC DIE CAST SCRAP
  • Scroll
  • Type : UNSORTED ZINC DIE CAST SCRAP
  • Metals : Zinc

Description

Produced from automobile fragmentizers. Material to contain about 55% zinc-bearing scrap. Other nonferrous metals such as aluminum, stainless steel, red metal, etc., to be about 40%. Insulated copper wire about 1%. Trash, dirt, glass, rubber, oil, iron, not to exceed 5%. Any variations to be sold by special arrangement between buyer and seller

References

Scrub HOT DIP GALVANIZERS SLAB ZINC DROSS (Batch Process)
  • Scrub
  • Type : HOT DIP GALVANIZERS SLAB ZINC DROSS (Batch Process)
  • Metals : Zinc

Description

Shall consist only of galvanizers unsweated zinc dross in slab form from hot dip galvanizing (Batch Process) with a minimum zinc content of 92% and shall be free of skimmings and tramp iron. Broken pieces under 2” in diameter shall not exceed 10% of the weight of each shipment. Slabs shall not weigh over 100 pounds each. Heavier pieces acceptable upon mutual agreement between buyer and seller. Material from continuous galvanizing operation is not acceptable. Blocks are acceptable upon mutual agreement.

References

Seal CONTINUOUS LINE GALVANIZING SLAB ZINC TOP DROSS
  • Seal
  • Type : CONTINUOUS LINE GALVANIZING SLAB ZINC TOP DROSS
  • Metals : Zinc

Description

Shall consist of unsweated zinc dross removed from the top of a continuous line galvanizing bath, in slab form not weighing in excess of 100 pounds each, with a minimum zinc content of 90%. Heavier pieces acceptable upon mutual agreement between buyer and seller. Shall be free of skimmings. Broken pieces under 2” in diameter shall not exceed 10% of the weight of each shipment.

References

Scull ZINC DIE CAST SLABS OR PIGS
  • Scull
  • Type : ZINC DIE CAST SLABS OR PIGS
  • Metals : Zinc

Description

Shall consist of melted zinc base die cast materials, in smooth clean solid slabs or pigs. Material to be free from drosses and to contain a minimum zinc content of 90%. To contain a maximum of 0.1% nickel and maximum of 1% lead. Blocks are accept￾able upon mutual agreement.

References

Seam CONTINUOUS LINE GALVANIZING SLAB ZINC BOTTOM DROSS
  • Seam
  • Type : CONTINUOUS LINE GALVANIZING SLAB ZINC BOTTOM DROSS
  • Metals : Zinc

Description

Shall consist of unsweated zinc dross removed from the bottom of a continuous line galvanizing bath, in slab form not weighing in excess of 100 pounds each, with a minimum zinc content of 92%. Heavier pieces acceptable upon mutual agreement between buyer and seller. Shall be free of skimmings. Broken pieces under 2” in diameter shall not exceed 10% of the weight of each shipment.

References

Shelf PRIME ZINC DIE CAST DROSS
  • Shelf
  • Type : PRIME ZINC DIE CAST DROSS
  • Metals : Zinc

Description

Shall consist of metal skimmed from the top of pot of molten zinc die cast metal. Must be unsweated, unfluxed, shiny, smooth, metallic and free from cor￾rosion or oxidation. Should be poured in molds or in small mounds weighing not over 75 pounds each.

References